본문 바로가기 주메뉴 바로가기
HOME
Company Overview

History

2018
  • The cost reduction project is under way about CABLE TIE localization development in HKMC/YURA

    - Passed the reliability test in PA/PE ALLOY material for low temperature shock at reduced cost
    compared to existing raw material applied KUM

    - Applied five drawings in YURA (completed mass production verification)/ CABLE TIE in GM 9BUX vehicle type in november, 2018

  • Passed the reliability test for automobile parts (PROTECTOR, BRACKET) in china
  • Passed the injection test and the reliability test applying KMM025B-40F Female material change
    in HIROSE
  • Developed Materials for MS941-03 CONNECTOR SPEC Type 7
  • Produced H/KMC SQ Model E/R, J/B MAIN BODY
  • Produced H/KMC RB, HI, OS, LF Model PROTECTOR, SMART J/BOX(IP BOX)
  • Developed H/KMC MS 941-07 Type “A-2” SPEC
  • Developed H/KMC MS 941-07 Type “F-2” SPEC
  • IATF 16949 : Transition to 2016 Certification (2018.02.09)
2017
  • Developed H/KMC MS 941-07 TYPE “F”, “G” SPEC
  • Developed FORD SPEC
2016
  • Developed H/KMC MS SPEC 941-07 TYPE “H” (HCPP+GF30%) I/P BOX(SMART J/BOX)
  • Developed Material for H/KMC ENGINE ROOM FUSE BOX (MS941-07 TYPE A)
  • Developed 8 type of MS941-03 CONNECTOR SPEC
  • Developed materials for KYOUNGSHIN & YURA china
  • Developed electromagnetic shielding material affiliated POLYAMIDE
2015
  • Contract between WITHCHEMICAL & HYUNDAI EP for agency
  • Contract between WITHCHEMICAL & SAMSUNG SDI for agency
  • Contract between WITHCHEMICAL & SK CHEMICAL for agency
  • Contract with SK CHEMICAL for OEM & ODM
  • Lee Jung Min, CEO of WITHCHMICAL, a sales company
  • Supplied Impact resistance PA6 & PA66 for H/KMC Cable Tie
2014
  • Added twin extruder(58mm) Total 5 extruders
  • TS16949 Certification, Established R&D center
  • Established WTHCHEMICAL Co.,Ltd as a sales subsidiary
2013
  • Moved to current location - Yanggam-Myun Hwasung-CityTWIN
  • Added 3 twin extruders (77m/m, 75m/m, 41m/m )
2012
  • Recognized as Advanced Tech. & INNOBIZ member by Government
2011
  • Developed and Applied PA for Fuse Box of Automotive
  • Start Production with the 1st twin extruder (77m/m)
  • Start Production with single extruder (PILOT 40m/m)
  • Production of composite PP for Automotive (Seat parts)
  • Start Production and Sales PA material
  • Start Operation the 2nd Twin extruder(58m/m)
2010
  • Established as KPCI
2009
  • Established as Yuho Camtech

Quick

TOP